Shure BETA 98H/C Clip-On Cardioid Condenser Microphone for Sax/Brass with Integrated Shock Mount and Attached Preamplifier (XLR)


Free Shipping Included! Shure BETA 98H/C Clip-On Cardioid Condenser Microphone for Sax/Brass with Integrated Shock Mount and Attached Preamplifier (XLR) by Shure at Velvet singer. MPN: BETA 98H/C. Hurry! Limited time offer. Offer valid only while supplies last. The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. The


Shure BETA 98H/C Clip-On Cardioid Condenser Microphone for Sax/Brass with Integrated Shock Mount and Attached Preamplifier (XLR) by Shure
4.9 out of 5 stars with 29 reviews
Condition: New
Availability: In Stock
$209.00


Quantity:  

 


Product Description & Reviews

The Beta 98H/C is a premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. The Beta 98H/C premium cardioid condenser instrument microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments, and its transformerless preamplifier circuitry improves linearity across the full frequency range. The pickup pattern of the BETA 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. The clip-on Shure Beta 98H/C instrument microphone. The integrated gooseneck and ratcheting swivel joint allows the mic to be easily positioned and secured, and an isolation shock-mount reduces the transmission of instrument "key noise" and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances. Key Features Transformerless preamplifier circuitry that improves linearity across the full frequency range. Pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise. High maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments. 10-foot high-flex cable with attached preamplifier (XLR connection) Tailored frequency response for open, natural sound reproduction Compact, lightweight construction provides a low degree of visibility Gooseneck, ratcheting swivel joint and gooseneck angle brace allow for optimum placement and fixed positioning Applications and Placement The most common BETA 98H/C applications and placement techniques are described below. Keep in mind that microphone technique is largely a matter of personal taste; there is no one "correct" microphone position. Saxophone Placement: Clamp the microphone onto the bell of the saxophone, so the microphone is a few inches from and facing into the bell. This will produce a bright tonal balance while minimizing feedback and leakage. Soprano Saxophone Placement: Clamp the microphone onto the bell of the saxophone and adjust the gooseneck so the microphone is facing the keys of the instrument, a few inches from the lower keys. This will produce a warm and full tonal balance. For a brighter tone, adjust the gooseneck so the microphone is facing into the bell, a few inches away. Trombone Placement: Clamp the microphone onto the bell of the trombone and adjust the gooseneck so the microphone is facing directly into the bell, a few inches away. This will produce a bright tonal balance while providing maximum isolation. Trumpet Placement: Clamp the microphone onto the bell of the trumpet and adjust the gooseneck so the microphone is facing directly into the bell, a few inches away. This will produce a bright tonal balance while providing maximum isolation. Drum Placement: Clamp the microphone onto the drum rim and adjust the gooseneck so the microphone is aiming a few inches above the drum head and an inch from the rim. This provides a full tonal balance. Specifications Type: Condenser (electret bias) Polar Pattern: Unidirectional (cardioid) Frequency Response: 20 to 20,000 Hz Output Impedance: 1200 ohms Output Level (0 dB = 1 volt per Pascal): Open Circuit Voltage: -56.5 dB (1.5 mV) Output Clipping Level (at 1kHz, THD < 1%): -9 dBV (0.35 V) Maximum SPL: 143.5 dB Dynamic Range: 112.5 dB Signal-to-noise Ratio: 63 dB at 94 dB SPL (IEC 651) Polarity: Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground). Weight: 2.3 ounces Frequency response. Polar pattern.

Features & Highlights

  • The Beta 98 H/C feature transformerless preamplifier circuitry which improves linearity across the full frequency range.
  • The pickup pattern provides high gain-before-feedback and excellent rejection of unwanted noise.
  • Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.
  • The Beta98H/C features a 3 m (10 ft.) high-flex cable with attached preamplifier (XLR connection)
  • Tailored frequency response for open, natural sound reproduction.(Phantom Power is Required to power this device up)

Additional Information

Brand:
Shure
Manufacturer:
Shure Incorporated
Category:
Instrument
Color:
Black
Model:
BETA 98H/C
MPN:
BETA 98H/C
Release Date:
2008-07-14
Warranty:
2 Year Limited, Proof Of Purchase Required
UPC:
042406083379
Part Number:
BETA 98H/C
Publisher:
Shure Incorporated
Publication Date:
2008-07-14
Binding:
Electronics
Item Weight:
0.34 pounds
Item Size:
5.29 x 1.25 x 1.25 inches
Package Weight:
1 pounds
Package Size:
5 x 3.4 x 10.1 inches

 


Have questions about this item (BETA 98H/C), or would like to inquire about a custom or bulk order?


If you have any questions about this product by Shure, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.

First Name:
Last Name:
Email Address:
Your Message:

Related Best Sellers


mpn: LFRQBLK, ean: 0868945000031,
Here's a radical new technology in microphones. Not quite, here's a radical old technology in microphones. Using a speaker as a low-frequency capture mic is nothing new. The Beatles used this technique as far back as the recordings of ''paperback wri...

mpn: F.01U.120.616, ean: 0686924564530,
Overview The RE320 Variable-D Dynamic Vocal and Instrument Microphone from Electro-Voice features a neodymium element, sensitivity and frequency response well suited to handle the gamut of recording applications. Electro-Voice's Variable-D tonal resp...

mpn: 59TVEH1306IVW, ean: 0748519892432,
DescriptionOur sound blocker remains nearly flush with your phone, ipad, or tablet, minimizing snags on items that could damage your equipment. Simple to use, comes with handy key chain case. Prevent thief hackers, corporations or governments are not...

mpn: A56D, ean: 0042406071376,
Mounts Shure drum microphones such as the SM57, Beta57, PG57, and other end address microphones to the side of a drum for compact and accurate drum mic placement.Mounts Shure drum microphones. SM57, Beta57, PG57. For compact and accurate drum mic pla...